基于控制体积方法的降落伞初始充气模型

考虑降落伞初始充气过程中降落伞变形情况与受力特性,建立了基于控制体积方法的初始充气模型。模型从理想气体状态方程出发,通过伞衣内部气体质量求解伞衣内部各个部分所受压力,将压力结果代入基于凯恩方法建立的伞衣结构模型中,即可得到对应的伞形;模型在计算时能够考虑伞衣结构透气的影响。数值计算的结果表明,模型计算得到的初始充气过程伞衣形状变化与试验吻合较好,初始充气时间与经验公式基本一致。该方法还可用于对降落伞主充气阶段的数值模拟。     

测控站远程监控体制的分析与设想

通过对欧空局(ESA)地面测控站监控体制的研究,分析了新一代测控站远程监控系统所应具备的优势及特点,探讨了适合我国国情的测控站远程监控技术,并对应用方案进行了设想。     

C919民用飞机飞控系统鉴定试验环境设计

C919 试验环境设计为C919 主飞控电子鉴定试验提供工具和手段,为机载设备适航检查提供支撑数据和证明材料。介绍C919 飞控系统鉴定试验的必要性以及主要的试验类型,对C919 飞控系统鉴定试验环境进行设计,包括试验环境的主要组成、功能以及测试时序和监控逻辑的设计等,并对民用飞机飞控系统鉴定试验环境的设计结果进行测试和评定。结果表明：该设计能够满足民用飞机鉴定试验要求,易于工程实现,过程数据处理算法以及鉴定试验结论报告能够支持适航符合性要求。     

自落式缓冲气囊仿真研究

缓冲气囊被广泛应用于武器装备及物资空投、航天器着陆回收、汽车安全气囊等领域。设计具有优良缓冲性能的气囊系统可以减小物品或乘员所受的冲击力,最大程度上避免了物资的损坏和乘员伤亡。文章以某型空投缓冲系统所用气囊作为研究对象,运用LS-DYNA有限元仿真软件,采用控制体积法对该气囊缓冲过程进行了数值模拟计算,同时,结合工程计算与试验测试,合理确定气囊设计中关键技术状态,获得了带有辅囊的自落式缓冲气囊设计思路与方法,提高了研制品质,节省了研制成本与周期。     

控制力矩陀螺磁悬浮转子的指数趋近积分滑模控制研究

针对微重力、动框架等多源扰动下磁悬浮控制力矩陀螺磁轴承转子系统的强非线性、参数摄动及未建模动态等问题,开展控制力矩陀螺的磁轴承转子鲁棒控制研究。建立了磁轴承转子轴向通道动力学模型与电磁力工作点线性化模型,分析了系统参数摄动及未建模动态,并在此基础上提出了一种非线性系统指数趋近积分滑模控制方法,设计了含有电流及位移的积分滑模平面,采用指数趋近律与饱和函数抑制抖振实现到达阶段滑模控制律。实验结果表明：采用该方法可有效抑制滑模的抖振现象,参数摄动时系统具有较佳动态性能,同时在转子转动、框架工作时保证系统良好鲁棒性。     

Designing method of acceleration and deceleration control schedule for variable cycle engine

Studies show that different geometries of a Variable Cycle Engine (VCE) can be adjusted during the transient stage of the engine operation to improve the engine performance. However, this improvement increases the complexity of the acceleration and deceleration control schedule. In order to resolve this problem, the Transient-state Reverse Method (TRM) is established in the present study based on the Steady-state Reverse Method (SRM) and the Virtual Power Extraction Method (VPEM). The state factors in the component-based engine performance models are replaced by variable geometry parameters to establish the TRM for a double bypass VCE. Obtained results are compared with the conventional component-based model from different aspects, including the accuracy and the convergence rate. The TRM is then employed to optimize the control schedule of a VCE. Obtained results show that the accuracy and the convergence rate of the proposed method are consistent with that of the conventional model. On the other hand, it is found that the new-model-optimized control schedules reduce the acceleration and deceleration time by 45% and 54%, respectively. Meanwhile, the surge margin of compressors, fuel–air ratio and the turbine inlet temperature maintained are within the acceptable criteria. It is concluded that the proposed TRM is a powerful method to design the acceleration and deceleration control schedule of the VCE.     

四轴飞行器姿态监控系统设计

设计了一套四轴飞行器上位机监控系统。针对准确掌握四轴飞行器的实时姿态、位置等信息和对四轴飞行器进行精准控制两大核心问题,开发了由上位机实现四轴飞行器姿态数据采集、通信及控制等功能的监控系统。监控系统良好的功能设计和友好的人机界面使得用户能够准确掌握飞行器的飞行信息,从而能够更精准地控制四轴飞行器飞行姿态。实验验证,监控系统简单实用,性能稳定,精度高,使整个飞行系统抗干扰能力强,鲁棒性、稳定性好。     

Civil unmanned aircraft system operation in national airspace: A survey from Air Navigation Service Provider perspective

Unmanned Aircraft Systems (UASs) have advanced technologically and surged exponentially over recent years. Currently, due to safety concerns, most civil operations of UAS are conducted in low-level uncontrolled area or in segregated controlled airspace. As the industry progresses, both operational and technological capabilities have matured to the point where UASs are expected to gain greater freedom of access to both controlled and uncontrolled airspace. Extensive technical and regulatory surveys have been conducted to enable the expanded operations. However, most surveys are derived from the perspective of UAS own operating mechanism and barely consider interactions of their non-segregated activities with the Air Traffic Management (ATM) system. Hence, to fill the gap, this paper presents a survey conducted from the perspective of Air Navigation Service Provider (ANSP), which serves to accommodate these new entrants to the overall national airspace while continuing flight safety and efficiency. The primary objectives of this paper are to: (A) describe what typical ANSP-supplied UAS Traffic Management (UTM) architecture is required to facilitate all types of civil UAS operations; (B) identify three major ANSP considerations on how UAS can be accommodated safely in civil airspace; (C) outline future directions and challenges related with UAS operations for the ANSP.     

空间机器人在轨更换ORU的力/位混合控制方法

针对ORU在轨更换任务,首先推导了空间机械臂末端自由、末端与环境接触等情况下的动力学方程,并提出了相应的接触力计算方法;其次,改进了传统的R\|C控制方法,采用加权选择矩阵代替原有的选择矩阵,实现了力控制与位置控制之间的平滑切换;最后,开发了基于Matlab/Simulink的闭环控制仿真系统,该系统由多体动力学、接触动力学、轨迹规划、力/位混合控制、3D显示等模块组成。利用该系统开展了ORU转移与安装过程的闭环控制仿真,仿真结果校验了所提方法的有效性。     

无人机用燃料电池阴极供气系统建模与控制

燃料电池因其高效、无污染、噪声小等特点,被认为是未来最具有潜力的无人机（UAV）用动力源,燃料电池阴极供气系统的控制技术是决定燃料电池系统性能和可靠性的关键。针对无人机用质子交换膜燃料电池（PEMFC）阴极供气系统,首先,考虑外界温度、压力、空气密度以及雷诺数等随高度变化的参数,建立了跨高度离心空压机模型并分析了其在不同高度下的工作特性,基于无刷直流电机反电势特征构建了高速空压机驱动电机模型。其次,通过计算燃料电池阴极氧气和氮气的动态分压获取了PEMFC电堆输出电压。设计了基于分数阶PI^λD^μ的过氧比和阴极气压控制方法,驱动电机采用有限集模型预测控制（MPC）实现快速的转矩响应,仿真结果表明设计的控制器可在无人机跨高度运行条件下实现过氧比的快速调节,同时维持阴极气压稳定,满足燃料电池阴极供气需求。